QUALITY with CONFIDENCE
Bostik® 1100 Fast Set is a one part urethane sealant that cures by reaction with atmospheric moisture to form a tough, flexible seal. It has tenacious adhesion to woods, metals, FRP and most plastics. Bostik 1100 Fast Set can be used in bonding, beading and sealing applications.
Sealing and bonding applications in general industry, HVAC, truck trailer, horse trailer, RV, emergency vehicle, bus, railcar, and container construction. Bostik1100FS should not be used for glazing, for plastic materials with high plasticizer content or corrosion/crack sensitive plastics.
Bostik 1100FS meets requirements of:
Federal Specification TT-S-00230C (COM-NBS) for one-component sealants as Class A, Non-Sag
ASTM C920-79 Standard Specifications for Elastomeric Joint Sealants as type S, Grade NS, Class 25, Use NT, A and M
Canadian Standard CAN/CGSB-19.13
Uncured Bostik 1100 Fast Set may be easily removed from hands and tools with Bostik® Hand & Tool Towels. Excess sealant should be dry-wiped from all surfaces and tools while still uncured. Cured sealant can be removed with a sharp blade. NOTE: Cured sealant is usually very difficult to remove without altering or damaging the surface to which the sealant was applied.
When stored at or below 80°F (27°C), Bostik 1100FS polyurethane sealant has a shelf life of nine months from date of manufacture.
Tool/Work Life...................................70 minutes
Tack Free Time.................................90 minutes
Curing Time @77°F..............................1.5 - 3 days
Flow, Sag or Slump...............................Nil
Staining........................................None
Hardness (Shore A)............................40 - 45
Modulus @ 100% Elongation.....................65 psi
Tensile Strength..............................240 psi
Elongation....................................850%
Adhesion in Peel.......................... >25 piw
Stain and Color Change.......................None
Ozone Resistance..........................Excellent
Joint Movement Capability.................. ±25%
UV Resistance................................Good
Heat and Aging.................................Good
Temperature Resistance...............-40° to 180°F
* Values given above are not intended to be used in specification preparation.